Blagdon-pump X75 Metallic Flap Valve User Manual download pdf (Page 13)

x75mfvmdl2sm-rev0411 Page 11

This pump is pressurized

internally with air pressure

during operation. Always

make certain that all bolting

is in good condition and

that all of th e correc t

bolting is reinstalled during assembly.

WARNING

Before pump operation,

i n s p e c t a l l g a s k e t e d

fasteners for looseness

caused by gasket creep. Re-

torque loose fasteners to

prevent leakage. Follow recommended torques

stated in this manual.

CAUTION

When used for toxic or

aggressive uids, the pump

should always be ushed

clean prior to disassembly.

WARNING

Before maintenance or

repair, shut off the com-

pressed air line, bleed the

pressure, and disconnect

the air line from the pump.

The discharge line may be

pressurized and must be bled of its pressure.

WARNING

Before doing any main-

te na nce on th e p ump ,

be certain all pressure is

completely vented from the

pump, suction, discharge,

p ip i n g, a n d a ll o t he r

openings and connections. Be certain the air

supply is locked out or made non-operational,

so that it cannot be started while work is being

done on the pump. Be certain that approved

eye protection and protective clothing are worn

all times in the vicinity of the pump. Failure to

follow these recommendations may result in

serious injury or death.

WARNING

Airborne particles and

loud noise hazards.

Wear ear and eye

protection.

WARNING

In the event of diaphragm

rupture, pumped material

may enter the air end of the

pump, and be discharged

into the atmosphere. If

pumping a product which is hazardous or toxic,

the air exhaust must be piped to an appropriate

area for safe disposition.

IMPORTANT SAFETY

INFORMATION

Take action to prevent static

sparking. Fire or explosion

can result, especially when

handling ammable liquids.

The pump, piping, valves,

containers or other miscellaneous equipment

must be grounded. (See page 10)

WARNING

IMPORTANT

Read these safety warnings

and instructions in this

manual completely, before

installation and start-up

of the pump. It is the responsibility of the

purchaser to retain this manual for reference.

Failure to comply with the recommendations

stated in this manual will damage the pump,

and void factory warranty.

Read these safety warnings

and instructions in this

manual completely, before

installation and start-up

of the pump. It is the responsibility of the

purchaser to retain this manual for reference.

Failure to comply with the recommendations

stated in this manual will damage the pump,

and void factory warranty.

RECYCLING

M a n y c o m p o n e n t s o f A O D D p u m p s a r e m a d e

of recyclable materials (see chart on page 12 for material

specications). We encourage pump users to recycle worn out parts

and pumps whenever possible, after any hazardous pumped uids

are thoroughly ushed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Blagdon-pump X75 Metallic Flap Valve User Manual Page 13

Comments to this Manuals

Related products and manuals for Pumps Blagdon-pump X75 Metallic Flap Valve